Static Furnace for Cycles of Vulcanization Elastomers
This vulcanization ovens is designed to meet the technical specifications for Post-curing treatment of elastomeric materials such as NBR, Silicone, Viton, etc., which require absolutely excellent temperature accuracy, homogeneity and air exchange.
The FG oven consists of an all-stainless steel chamber, a group of stainless steel armored heating elements, a motor for ventilation, and an electrical panel equipped with an electronic programmer capable of storing desired work cycles. The door gaskets are made of high-temperature fiberglass ensuring an excellent seal.
Rotary Oven for Elastomer Vulcanization Cycles
This is an oven designed for post-curing treatment of elastomeric materials and especially for O-Rings, for which flatness is required.
All types of materials such as: NBR, Silicones, Viton etc. The material to be treated is poured inside a perforated rotating basket made of stainless steel and placed in continuous rotation, also it is invested by two streams (to the right and left of the basket) of hot air. The air is heated by means of finned stainless steel armored heating elements with high heat exchange.
Polymer Sintering Furnace
(PTFE)
These furnaces are designed for the specific application of sintering treatments on PTFE polymers.The maximum working temperature is 450°C.
The insulation is designed to have minimal temperature dispersion to the outside.
Enhanced ventilation enables excellent distribution within the chamber. There are 4 temperature probes that interact for monitoring as well as optimal ramp management and thermal stability.
The motorized door allows easy loading and unloading of material.
The electrical panel of our own design and the use of a Siemens PLC temperature controller connected via Ethernet to one of our remote management software allows the best possible programming as well as time/temperature cycle recording.
A “redundant” safety system monitors that the alarm and danger temperature is not exceeded.
The heat exchanger provides significant energy savings.
Pre-Heating Oven Molds
This oven is designed to house the molds before they are installed on the press.
The mold heated to about 150°C allows a significant reduction in the waiting time for the start of production, estimates of reductions of about half the time have been made.
The furnace is a traditional electrically heated furnace but with a very strong and durable structure, inside the chamber are roller tracks of hardened material with high-temperature bearings and an air circulation fan ensures excellent temperature distribution and rapid heating of the housed molds
Strong mechanical stops ensure that the mold is locked and safe
The construction of these furnaces are “dedicated” and are designed to the customer’s specifications, numbering, minimum and maximum dimensions as well as mold weight. They can be designed to accommodate molds vertically or horizontally.
BINDER STOVES (up to 300° C)
Drying and heating stoves in Advangarde.Line version with forced ventilation and advanced programming functions.
The FED series is extremely complete in every respect. It features almost unlimited capacity while being particularly adaptable to the specific requirements of a wide variety of applications. The improved timing functions and digitally controlled air turbine can be used to adjust temperature parameters and ideal air recirculation conditions.
NABERTHERM STOVES (> 300° C)
These chamber furnaces equipped with an air circulation system are particularly distinguished by the excellent temperature uniformity they enable. Thus they are particularly suitable for processes such as cooling, crystallization, preheating, precipitation garmenting, and also for numerous tool manufacturing processes.
Thanks to their modular design, these convection ovens can be perfectly adapted to any process requirement through the use of appropriate accessories.
Please visit official web site for more information:
vulcanization ovens